Window treatment ideas for a kitchen

Photo: Wikimedia Commons

Dressing your windows with the right style can completely change how your cooking space feels. If you want to study more about general Interior design principles, a few simple updates will bring fresh life to your room.

Here are the exact steps and materials you need to update your cooking space. You can finish most of these projects in less than an hour on a quiet Saturday morning.

Window treatment ideas for a kitchen

Start by measuring your window frame from top to bottom using a steel tape measure. Write down the exact width and height before you buy any fabric or hardware to make sure everything fits your space.

• Take down any old plastic blinds using a flathead screwdriver in ten minutes.
• Fill any screw holes in the wall with quick drying spackle and let it dry for thirty minutes.
• Sand the patched spots smooth with fine grit sandpaper so the wall is flat.

Choose lightweight fabrics that let the morning sun shine through while keeping your privacy intact. Natural materials look wonderful in any Kitchen because they add texture and warmth to hard surfaces like tile and stone.

Buy a simple brass curtain rod that matches your cabinet hardware and drawer pulls. This small detail ties the whole room together and makes the design look planned and neat.

Photo from the web

Hang sheer linen cafe curtains

Cafe curtains cover only the bottom half of the glass, which gives you privacy at eye level while leaving the top open for sky and sun. This classic look works especially well behind a sink or a dining nook.

• Measure halfway up your window glass and make a light pencil mark on each side.
• Install two small metal brackets using a cordless drill and four wood screws.
• Slide your lightweight linen panel onto a thin iron rod and rest it on the brackets.
• Adjust the soft folds by hand so the fabric hangs in even waves across the glass.

Linen is a fantastic fabric choice because it washes easily and handles high humidity without shrinking or holding moisture. Pick a soft white or oatmeal colour to keep the room feeling bright and airy.

Take ten minutes every three months to unhook the fabric and wash it on a gentle cycle. Hang the damp linen right back on the rod so it dries wrinkle free in the sun.

Install bamboo Roman shades

Bamboo shades bring a warm earthy tone and a lovely woven texture that softens plain white walls. They roll up neatly when you want maximum light and drop down smoothly when you need shade.

• Hold the woven shade mount inside the top of the window frame and mark the screw spots with a pencil.
• Drill pilot holes for each bracket to prevent the wood trim from splitting.
• Secure the metal mounting brackets tightly with a handheld screwdriver.
• Click the headrail of the bamboo shade into place and test the pull cord three times.

Dust these natural shades once a week using a soft feather duster or your vacuum brush attachment. This quick step stops dust from settling into the small bamboo reeds and keeps your window looking fresh.

Pair your new bamboo shades with simple cotton side panels if you want a layered and cosy appearance. Choose a solid neutral fabric that matches your floor tiles or counter tops.

Use frosted window film for privacy

Frosted film is a brilliant choice for ground floor spaces where neighbours walk close to your glass. It blocks the view from the outside while letting nearly all the daylight filter right through.

• Clean your window glass thoroughly using glass cleaner and a lint free microfiber cloth for five minutes.
• Spray the wet glass generously with a mixture of water and one drop of washing up liquid.
• Peel the backing off the frosted vinyl film slowly while pressing it against the wet glass.
• Push all trapped air bubbles out to the edges using a flat plastic squeegee card.

Trim any extra film along the rubber window gasket using a sharp utility knife for a clean finish. Take your time on this step so the edges do not peel up later.

Wipe the finished film down with a damp cloth whenever you clean the rest of your glass surfaces. Avoid using harsh chemical sprays or abrasive sponges that could scratch the smooth vinyl surface.